Brother TS-02 Error
What it means
The printer could not connect to your wireless network. Usually the network was not found, the signal is too weak, or the password was wrong. It is a connection problem, not a hardware fault.
Guides that cover this kind of fault
A guide written for TS-02 itself is still being checked against the manufacturer's documentation. These cover the same underlying problem and are filed under wifi & network.
- Printer WPS Button Not Working: Causes and Manual FixesWPS pairing usually fails because the two minute timing window expired, the router has WPS disabled in its settings, or the printer cannot connect to...
- Printer Only Connects to 2.4 GHz Wi-Fi: Causes and FixesMost wireless printers only contain 2.4 GHz Wi-Fi radios and cannot detect 5 GHz networks. To fix this, log into your router and enable a separate 2.4...
- Pantum Wi-Fi Not Connected: Causes and FixesPantum wireless printers fail to connect most commonly because they only support 2.4GHz networks and cannot see 5GHz routers. Switch your router to...
Common questions
What does the TS-02 error mean on a Brother printer?
The printer could not connect to your wireless network. Usually the network was not found, the signal is too weak, or the password was wrong. It is a connection problem, not a hardware fault.
Is the TS-02 error serious?
Not usually. Codes at this level normally clear once the condition they describe is dealt with, and a printer that carries on working afterwards has nothing further wrong with it.
Different code or problem?
Switch off and unplug a printer before reaching inside it. If a fault involves the power supply or internal electronics, or the machine is under warranty, contact the manufacturer or a qualified technician. Full disclaimer. Brand and code names are trademarks of their owners; PrinterFixUp is independent and unaffiliated.